AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 388

Lines and Trunks
Console Display/Instructions
4 Specify the hold disconnect line(s).
Hold Disconnect:
Lines w/long interval
Lines 01-20 Entry Mode
- Lines 21-40
- Lines 41-6O
– Lines 61-80
Exit
Singie Line Procedure
1 Specify entry mode.
Select Entry Mode.
Enter the number of the line or trunk with a long disconnect interval.
2
Hold Disconnect:
Enter lines/trunks with
long interval
Delete
Backspace
Exit Enter
Assign or remove the line/trunk.
3
Select Enter or
Delete.
4 Return to the System Programming menu.
Select Exit.
Block Procedure
1 Specify the block of 20 lines associated with 20 buttons on the system
programming console.
Select Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80.
4–38
Programming Procedures
Additional Information
For a single line, go to
Single Line Procedure.
For a block of lines, go to
Block Procedure.
Dial or type [ nnn ].
You may continue to assign or remove a -
long disconnect interval from additional
lines/trunks by repeating Steps 2 and 3.
PC
[ F6 ]
←
[ F10 ]
[ F8 ]
[ F5 ] [ F5 ] [ F5 ]
[ F1 ]
[ F2 ]
[ F3 ]
[ F4 ]