Auxiliary Equipment - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

Auxiliary Equipment

Auxiliary Equipment
The procedures in this section describe the steps needed to perform the
following:
Identify the line/trunk jacks used for Music on Hold, loudspeaker paging,
and maintenance alarms.
Identify the extension jacks used for fax, MERLIN MAIL, Voice Messaging
System, Automated Attendant, and AUDIX Voice Power.
Music on Hold
Use this procedure to identify the line/trunk jack reserved for connection of a
music source, such as a radio, tape player, or stereo system.
NOTES:
1. If you use equipment that rebroadcasts music or other copyrighted
materials, you may be required to obtain a copyright license from and
pay license fees to a third party [such as the American Society of
Composers, Artists, and Producers (ASCAP) or Broadcast Music
Incorporated (BMI)]. Magic on Hold
be purchased from your AT&T dealer.
2. Only one Music on Hold line/trunk jack is allowed per system.
3. You cannot assign the line/trunk identified for Music on Hold to a
line/trunk pool. If the line/trunk is currently assigned to a pool, you must
remove it before you program this option.
4. You cannot assign the line/trunk identified for use with Music on Hold to a
button on any telephone or as a Remote Access trunk, and you cannot
use the line/trunk jack identified for Music on Hold for a loudspeaker
paging system or maintenance alarm.
Summary: Music on Hold
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
®
requires no such license and can
System manager
All, but in Hybrid/PBX mode the line/trunk designated for
Music on Hold cannot be assigned to a line/trunk pool.
System idle
Form 2c, System Numbering: Line/Trunk Jacks
Not Applicable
Line/trunk number
Programming Procedures
4-175