AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 501

PRI Facilities
Console Display/Instructions
8 Enter the dial prefix.
Continue to assign the dial prefix to another table or go to Step 10.
9
Select Next
10 Save your entry.
Select Enter.
11 Return to the System Programming menu.
Select Exit three times.
Special Services Tables
Eight tables provide for international calling and for operator-assisted calls.
Default tables include the special prefixes O and 00 for operator-assisted calls.
Dialed numbers are matched against entries in these tables for patterns (011,
010, 01, 00, 0, and 1); for operator assistance (operator-assisted,
presubscribed common carrier operator, and none); and for type of number
(national or international). Up to four digits can be deleted.
Summary: Special Services Tables
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
Additional Information
Dial or type [ n ].
Return to Step 7. The next table will be
displayed on Line 1.
System manager
Key and Hybrid/PBX
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
See Table 4-2
Prefix for international or operator-assisted calls
No
No
To specify Pattern:
LinesTrunks → PRI → OutgoingTbl → Special Serv →
Pattern → Dial entry no. → Enter → Drop → Dial pattern →
Enter → Exit → Exit → Exit → Exit
To specify Operator:
LinesTrunks → PRI → OutgoingTbl → Special Serv →
Operator → Dial entry no. → Enter → Select type of
operator → Enter → Exit → Exit → Exit → Exit
Programming Procedures
PC
←
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ] [ F5 ]
4–151