AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 186

Telephones
Console Display/Instructions
3 Enter the logical ID of the first extension number in the block to be copied to.
Copy extension
Enter starting extension
logical id (#1 - #144)
Backspace
Enter
Exit
4 Save your entry.
Select Enter.
5 Enter the logical lD of the last extension number in the block to be copied to.
Start at extension xxxx
Enter ending extension
logical id (#l - #144)
Backspace
Enter
Exit
Save your entry.
6
Select Enter.
7 Return to the System Programming menu.
Select Exit two times.
Assign Intercom or System Access Buttons
Use this procedure to assignor change the assignments for lntercom (lCOM)
buttons used to make and receive inside calls. This includes the following types
of Intercom buttons:
Ring
Voice
Originate Only (Ring or Voice)
In Hybrid/PBX mode only, use this procedure to assign or change assignments
for System Access (SA) buttons used to make or receive inside and outside
calls This procedure includes the following types of System Access buttons:
Ring
Voice
Originate Only (Ring or Voice)
Shared (Ring or Voice)
3–64
Common Administrative Procedures
Additional Information
xxxx extension entered in Step 4 of the
xxxx =
main procedure
Dial or type # [ nnn ].
= extension number of logical id
XXXX
entered in Step 1
Dial or type # [ nnn ].
PC
←
[ F10 ]
←
[ F10 ]
[ F5 ] [ F5 ]