AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 727

General Feature Use and Telephone Programming
Table D–3. Programming MLX 10 Telephones
Step
Label the button.
1
Note: Skip this step if the feature
will not be programmed onto a
button.
2 Begin programming
3 Select the feature.
4 End programming.
Action
Remove the clear label cover from the
telephone by pulling up on the tab that
extends from the top of the cover.
Write the feature name on the card next to
the button to be programmed.
Replace the cover.
Press the Feature button and then dial 00.
Press the button you labeled.
Note: If the feature does not get
programmed onto a button, press any line
button. This does not affect the button in
any way.
Dial the programming code.
The feature is programmed.
Press the Feature button and dial *00.
System Programming
D–11