AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 389

Lines and Trunks
Console Display/Instructions
Specify touch-tone or rotary signaling for each block.
2
Return to the System Programming menu.
3
Select Exit.
Principal User for Personal Line
Use this procedure to assign or remove one telephone as principal user for a
personal line. When a telephone with Remote Call Forwarding activated is
assigned as principal user, calls received on the personal line are forwarded to
an outside telephone number. In addition, calls received on that line are sent to
that telephone's individual and/or Group Coverage receivers unless the
personal line button is set to No Ring.
The principal user assignment must be removed before the trunk can be
removed from a button on the telephone.
When no principal user is assigned for a personal line, calls received on the
personal line are not forwarded to outside telephone numbers; calls received on
the personal line follow the coverage patterns for all users who share the line.
Summary: Principal User for Personal Line
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Additional Information
Toggle the green LED on or
off as required.
On = long hold disconnect interval.
Off = short hold disconnect interval.
System manager
All
Not required
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
No principal user
Not applicable
No
No
[ F5 ] [ F5 ] [ F5 ]
Programming Procedures
PC
4–39