AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 536

Optional Telephone Features
PC Procedure
Pool Dial-Out Code
Use this procedure to allow or restrict dialing pool dial-out codes and the
placing of calls on specific line/trunk pools. Entering a pool dial-out code and
then deleting that code restricts the user from using the pool associated with the
entered code.
Summary: Pool Dial-Out Code
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
4–186
Programming Procedures
To program a single extension:
[ PgUp ] → [ F6 ] → [ F2 ] → [ F1 ] → Type ext. no. → [ F10 ] → Select
a language → [ F10 ] → [ F5 ] → [ F5 ]
To program a block of extensions:
[ PgUp ] → [ F6 ] → [ F2 ] → [ F2 ] → Type starting ext. no. → [ F10 ]
→ Type ending ext. no. → Select a language → [ F10 ] →
[ F5 ] → [ F5 ]
System manager
Hybrid/PBX
Telephone idle
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct (DLC): Digital
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Station
Data Form 1b, 7500B Data Station
Main pool: 70; All other pools: 890 to 899. All telephones
can dial any line/trunk pool dial-out code.
Pool numbers
Yes
No
Extensions → Dial OutCd → Dial ext. no. → Enter → Dial
pool dial-out code → Enter → Exit → Exit
[ F6 ] → [ F3 ] → Type ext. no. → [ F10 ] → Type pool dial-out code
→ [ F10 ] → [ F5 ] → [ F5 ]