AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 568

System Features
One-Touch Hold applies to incoming central office calls only. When the user
presses an Auto Dial or DSS button to initiate a transfer, the outside caller is put
on hold. The system automatically selects an intercom facility and dials the
transfer destination. There is no transfer return function with this method.
Consequently, if the transfer destination does not answer or is busy, the user
who initiates the transfer must notify the outside caller, or the outside caller will
remain on hold.
One-Touch Hold is the factory setting in Behind Switch mode only.
Summary: One-Touch Transfer/Hold
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Transfer Audible
Use this procedure to specify whether an outside caller hears ringing (also
called ring back) or Music On Hold while being transferred. Inside callers always
hear ringback during a transfer.
NOTE:
If you use equipment that rebroadcasts music or other copyrighted materials,
you may be required to obtain a copyright license from and pay license fees to
a third party (such as the American Society of Composers, Artists, and
Producers or Broadcast Music Incorporated). Magic on Hold requires no such
license and can be purchased from AT&T.
4–218
Programming Procedures
System manager
All
Not required
Form 8a, System Features
One-Touch Transfer, automatic completion (One-Touch
Hold is the factory setting in Behind Switch mode.)
Transfer, Hold
No
No
To program One-Touch Transfer:
Options → Transfer → One Touch → Transfer → Enter →
Manual or Automatic → Enter → Exit → Exit
To program One-Touch Hold:
Options → Transfer → One Touch → Hold → Enter → Exit →
Exit
To program One-Touch Transfer:
[ F7 ] → [ F1 ] → [ F2 ] → [ F1 ] → [ F10 ] → [ F1 ] or [ F2 ] → [ F10 ] → [ F5 ] → [ F5 ]
To program One-Touch Hold:
[ F7 ] → [ F1 ] → [ F2 ] → [ F2 ] → [ F2 ] → [ F10 ] → [ F5 ] → [ F5 ]