AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 530

Auxiliary Equipment
Maintenance Alarms
Use this procedure to identify the line/trunk jack that connects an external
alerting device that sounds or flashes when major maintenance problems occur
You cannot assign the line/trunk identified for the maintenance alarm to a button
on any telephone or as a Remote Access trunk, and you cannot use its
line/trunk jack to connect a loudspeaker paging system or Music on Hold.
Summary: Maintenance Alarms
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Maintenance Alarms
Console Display/Instructions
1
Select the Auxiliary Equipment menu.
System Programming:
Make a selection
Extensions
System
SysRenumber Options
Operator Tables
AuxEquip
LinesTrunks
NightSrvce
Exit
Select Maintenance Alarms.
2
Auxiliary Equipment:
Make a selection
VMS/AA
MusicOnHold
Ldspkr Pg
Fax
PlaintAlarms
Exit
4-180
Programming Procedures
System manager
All, but in Hybrid/PBX mode, the line/trunk designated for
the maintenance alarm cannot be assigned to a line/trunk
pool.
System idle
Form 2c, System Numbering: Line/Trunk Jacks
Not Applicable
Line/trunk number
No
No
AuxEquip → MaintAlarms → Dial line/trunk no. → Enter →
Exit → Exit
[ F9 ] → [ F4 ] → Type line/trunk no. [ F10 ] → [ F5 ] → [ F5 ]
Additional Information
>
PC
[ F9 ]
[ F4 ]