Common Administrative Procedures; Introduction - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

Common Administrative
Procedures

Introduction

This chapter contains procedures for all of the common administrative tasks
performed by the system manager in response to changes in business
requirements. The procedures described in this chapter are defined briefly
below:
Change Basic System Operating Conditions
These procedures apply to the system rather than to the operation of
telephones, lines/trunks and operator positions. The procedures covered
are:
Reassign the extension jack used for system programming.
Change the system language.
Set the system date and time.
Renumber extensions
Use this procedure to assign a new extension number to a telephone,
accessory, line/trunk, pool (Hybrid/PBX only) or group. The extension
number to be assigned must currently be unassigned.
Add or change operator positions
Add or delete a system operator position for either the Queued Call
Console (QCC) or the Direct-Line Console (DLC). A maximum of eight
operator positions can be assigned with a maximum of four of those
being QCCS.

Common Administrative Procedures

3–1