Program Extension - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

Program Extension

2 Select Centralized Programming.
System Programming
Make a selection
Labeling
Data
Print
Cntr-Prg
Exit
3 Select a programming option.
Centralized Programming:
Make a selection
Program Ext
Copy Ext
Exit Enter
4 Go to the appropriate section.
The following sections explain the use of menu selections for programming a
single extension (Program Extension), and for using one extension as a
template for programming several extensions of the same type (Copy
Extension).
NOTE:
It is recommended that you use the programming codes for centralized
programming; however, you may also use the List Features option that is
available on the programming screen. See "Using the List Feature Menu" for
details about this option.
Program Extension
Review the items below before you begin to program extensions.
Use Table 5–1 to locate the code for the feature that you want to
program.
If you enter a feature code incorrectly or enter a feature code that is not
appropriate for the button, a beep sounds or the message Programming
Error appears and the green LED next to the button flashes. If this
happens, press the button again and repeat the procedure.
Select Program Ext or
Copy Ext.
Centralized Telephone Programming
[ F4 ]
[ F1 ]
[ F2 ]
5-3