AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 567

System Features
Transfer Return Time
Use this procedure to specify the number of times the telephone rings before a
call transferred to another inside telephone is returned to the originator. A
setting of 0 means that transferred calls are never returned to the originator.
NOTE:
The transfer return time should not be set to 0 in a system with single-line
telephones.
Summary: Transfer Return Time
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
One-Touch Transfer/One-Touch Hold
Use this procedure to assign the One-Touch Transferor One-Touch Hold
feature.
One-Touch Transfer allows users to initiate transfers to another extension by
pressing an Auto Dial or DSS button for that extension. If the One-Touch
Transfer feature is assigned, you must also specify whether the transfer
completion is manual (the user has to press another button to complete the
transfer) or automatic (the transfer is completed automatically).
The One-Touch Transfer feature is not available on single-line telephones.
System manager
All
Not required
Form 8a, System Features
4 rings (Integrated Administration: 6 rings)
0 to 9 rings
No
No
Options → Transfer → Return Time → Drop → Dial no. of
rings → Enter → Exit → Exit
[ F7 ] → [ F1 ] → [ F1 ] → [ Alt ] + [ P ] → Type no. of rings → [ F10 ] → [ F5 ]
→ [ F5 ]
Programming Procedures
4-217