AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 505

PRI Facilities
Console Display/Instructions
6 Save your entry.
Select Enter.
7 Return to the System Programming menu.
Select Exit four times.
Operator Procedure
1 Enter the table number ( n = 0 to 7 ).
Special Services Table:
Enter entry number (O-i')
Backspace
Exit Enter
2 Save your entry.
Select Enter.
3 Specify the type of operator.
SpecialServ Tbl Entry x:
Choose type of operator
Local Operator
–
–
Presubscribed Carrier
–
No Operator
Next
Enter
Exit
4
Contlnue to assign the operator type to another table or go to Step 5.
Select Next.
5 Save your entry.
Select Enter.
6 Return to the System Programming menu.
Select Exit four times.
Additional Information
Dial or type [ n ].
x = number entered in Step 1
Select Local Operator,
Presubscribed Carrier, or
No Operator.
Return to Step 3, The next table will be
displayed on Line 1.
Programming Procedures
PC
[ F10 ]
[ F5 ] [ F5 ] [ F5 ] [ F5 ]
←
[ F10 ]
[ F1 ]
[ F2 ]
[ F3 ]
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ] [ F5 ] [ F5 ]
4–155