AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 468

PRI Facilities
Single Line Procedure
Console Display/Instructions
1 Specify entry mode.
Select Entry Mode.
2
Enter a line number.
B-Channel Group xx:
Enter line number
Delete
Backspace Next
Exit Enter
3 Assign or remove the line number from the B-channel group.
Select Enter or
Delete.
4
Continue to assign the line number to another B-channel group or go to Step 5.
Select Next.
5 Save your entry.
Select Enter.
6 Return to the System Programming menu.
Select Exit three times.
Block Procedure
1 Specify the block of 20 lines associated with 20 buttons on the system
programming console.
Select Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80.
2 Assign the line(s) to the B-channel group.
3 Return to the System Programming menu.
Select Exit three times.
4–118
Programming Procedures
Additional Information
xx = number entered in Step 12
Dial or type [ nnn ].
You may continue to assign or remove
additional lines from the B-Channel group
by repeating Steps 7 and 8.
Return to Step 2. The next group will be
displayed on Line 1.
Toggle the green LED on or
off as required.
On = lines are assigned to B-channel.
Off = lines are not assigned to B-channel.
PC
[ F6 ]
←
[ F10 ]
[ F8 ]
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ] [ F5 ]
[ F1 ]
[ F2 ]
[ F3 ]
[ F4 ]
[ F5 ] [ F5 ] [ F5 ]