Memory Card Formatting Messages - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

Memory Card
Format Warning
Format Memory Card:
All data on card will be
DELETED.
Do you want to continue?
– Yes
– No
– Exit
This screen appears if you respond to the system prompt to format the memory
card.
Select Yes (or press [ F3 ] to begin the memory card format. Table 4-8 lists the
screen messages that may appear while formatting is in progress.
Table 4–6. Memory Card Formatting Messages
Message
Formatting Memory Card
Formatting of Memory
Card Completed.
Memory Card cannot be
formatted.
Formatting of Memory
Card FAILED.
Missing Card or Card Not
Inserted Correctly
Menu
If Home or
terminated. The data on the memory card may be lost. See Chapter 1,
"Programming Basics", for detail about these keys.
Backup
Use this procedure to make a copy of your customized system data. You should
create a backup at least three times during system installation (so that
programmed information is not lost), and once after each system upgrade,
service technician visit, or major system reconfiguration.
See Chapter 3, "Common Administrative Procedures, " for detailed information
and a list of errors that can occur during a backup procedure.
What it Means
The format is in progress.
The format was successful and has
completed.
The memory card cannot be formatted. Remove
the card and repeat the procedure with another
card.
The format was unsuccessful. Remove the card
and repeat the procedure with another card.
Verify that the card is inserted correctly and
repeat the procedure.
are pressed during a format procedure, the format is
Programming Procedures
4–303