AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 482

PRI Facilities
Console Display/Instructions
5 Save your entry.
Select Enter.
6 Erase the current test telephone number ( N ).
Slot xx Text Tel Number
Enter test number
N
Backspace
Next
Exit Enter
7 Enter a telephone number of up to 12 digits to be assigned as the test number to
the 100D module ( N = any combination of O to 9 ).
8 Continue to assign the test telephone number to another 1000 module or go to
Step 9.
Select Next.
9 Save your entry.
Select Enter
10 Return to the System Programming menu.
Select Exit two times.
Timers and Counters
Use this procedure to set timer and counter thresholds.
CAUTION:
The factory settings for these thresholds are standard and rarely need to
be changed. If you are not sure of the correct timer and threshold settings
for your PRI lines and trunks, check with your A T& T representative before
you make a change. Incorrect settings can cause your PRI lines and
trunks to malfunction.
If the network does not respond before the programmed time or count, the
system takes the appropriate corrective action.
4-132
Programming Procedures
Additional Information
xx = number entered in Step 4
Dial or type [ N ].
Return to Step 6. The next slot will be
displayed on Line 1.
PC
[ F10 ]
[ Alt ] + [ P ]
←
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ]