AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 455

DID Trunks
Console Displey/Instructions
9 Save your entry.
Select Enter.
10 Return to the System Programming menu.
Select Exit two times.
Add Digits
Use this procedure to specify the number of leading digits that must be added
to the digits sent by the local telephone company. Use this procedure when the
number of digits sent by the telephone company is fewer than the number in the
system numbering plan.
Summary: Add Digits
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
Procedure: Add Digits
Console Display/Instructions
1 Select the Lines and Trunks menu.
System Programming: >
Make a selection
System Extensions
Options
SysRenumber
Operator Tables
LinesTrunks AuxEquip
Exit NightSrvce
Additional Information
System manager
Hybrid/PBX
Not required
Form 3d, Incoming Trunks: DID
o
1 to 9999
No
No
LinesTrunks → DID → Add Digits → Dial trunk block no. →
Enter → Drop → Dial added digits → Enter → Exit → Exit
Additional Information
Programming Procedures
PC
[ F10 ]
[F5 ] [ F5 ]
PC
[ F4 ]
4-105