AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 312

Night Service
Console Display/Instructions
Select Exclusion List.
13
Night Service:
Make a selection
Start
GroupAssign
OutRestrict stop
Time Control
Emergency
ExcludeList
Exit
14 Specify the extension.
Night Serv Exclusion:
Enter extensions
excluded
Delete
Backspace
Enter
Exit
15 or remove the extension(s) from the exclusion list.
Assign
Select Enter or
Delete.
16 Return to the System Programming menu.
Select Exit two times.
Night Service with Time Set
Use this procedure to specify the time of day and the days of the week when
Night Service is to be activated and deactivated.
Enter the time of day as 4 digits, using 24-hour notation. Enter the day of the
week as a single digit (0 to 6), with 0 being Sunday. If you enter an invalid
number, the system truncates the number.
If you change the system time while Night Service is active, Night Service is
deactivated automatically and you must manually reactivate it.
Operators can override the timer and turn Night Service on and off manually.
This feature can be deactivated when out-of-the-ordinary situations occur (for
example, a midweek holiday).
3–190
Common Administrative Procedures
Additional Information
lf no DSS is attached:
SP:
"Entering an Extension"
lf DSS is attached:
Toggle the red LED on or
off as required. Then, go to Step 16.
On = extension is excluded from list.
Off = extension is not excluded from list.
Continue to add or delete extensions by
repeating Steps 14 and 15.
PC
[ F4 ]
←
[ F10 ]
[ F8 ]
[ F5 ] [ F5 ]