AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 437

Tie Trunks
PC Procedure
Procedure: Tie Trunk Dial Tone
Console Display/Instructions
1 Select the Lines and Trunks menu.
System Programming:
Make a selection
System Extensions
Options
SysRenumber
Operator Tables
AuxEquip
LinesTrunks
NightSrvce
Exit
2 Select Tie Lines.
Lines and Trunks:
Make a selection
PRI
LS/GS/DSl
Copy
TIE Lines
RemoteAccss
TT/LS Disc
Pools
DID
Exit Toll Type
3 Select Dial Tone.
TIE Trunks:
Make a selection
Inmode
Direction
Intype Outmode
Dialtone
outtype
AnsSupvr
E&M Signal
Exit Disconnect
4 Specify the line(s).
**** Dial Tone:
Enter trunk w/Remote Dial
Lines 01-20 Entry Mode
–
– Lines 21-40
- Lines 41-6O
- Lines 61-80
Exit
To program a single line/trunk:
[ F4 ] → [ F2 ] → [ F8 ] → [ F6 ] → Type trunk no. → [ F10 ] or → [ F8 ] → [ F5 ]
→ [ F5 ]
To program a block of lines/trunks:
[ F4 ] → [ F2 ] → [ F8 ] → Select block of lines → Toggle letter G
On/Off → [ F5 ] → [ F5 ] → [ F5 ]
Additional Information
>
**** = option name selected in Step 3
For a single line, go to
Single Line Procedure.
For a block of lines, go to
Block Procedure.
[ F4 ]
[ F2 ]
[ F8 ]
Programming Procedures
PC
4–87