AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 353

Basic System Operating Conditions
Procedure: System Restart
Console Display/lnstructions
1 Select the System menu.
System Programming: >
Make a selection
system Extensions
SysRenumber Options
Operator Tables
LinesTrunks AuxEquip
Exit NightSrvce
2 Select System Restart.
System
Make a selection
Restart MaintenBusy
SProg Port Date
Time
Mode
Board Renum Back/Restore
Exit
3 Respond to the query.
System Restart:
System will be down . . .
Do you want to continue?
–
Yes
–
No
Exit
Restart
System is restarting
System Programming Position Assignment
Use this procedure to reassign the extension used for system programming.
This extension should not be the same extension as that used for the operator
position. The system programming position can be reassigned only to one of
the first five extension jacks on the first MLX module. Only one system
programming console is allowed per system.
Additional Information
To restart the system selectees. The
system restart screen appears.
To terminate the restart and return to the
System menu select No, then select
Exit.
The session is finished, and the system
restarts. You must enter system
programming again to continue.
Programming Procedures
PC
[ F1 ]
[ F1 ]
[ F1 ]
[ F2 ]
[ F5 ]
4–3