AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 211

Optional Telephone Features
Copy Call Restrictions
Use this procedure to copy calling restrictions, allowed lists, and disallowed
lists. Feature assignment must be completed for the "copy from" extension.
These features can then be copied to an individual extension or block of
extensions with identical calling restriction requirements.
If you are copying restrictions to a block of extensions and one of the
extensions in the block is in use, the display shows the Station Busy - Pls
Wait message. Copying for the rest of the extensions in the block is delayed
until the busy extension becomes idle. The number of the busy extension is not
shown. If a DSS is attached, the LED associated with the busy extension is on. If
you exit instead of waiting for the busy extension to become idle, copying for
the rest of the extensions in the block is canceled; however, the restrictions that
have already been copied are not canceled.
If you are copying restrictions to a block of extensions, they must be
sequentially numbered.
The extensions you are copying to and from can be both operator and
nonoperator positions.
NOTE:
Dial-out code restrictions are not copied.
Summary: Copy Call Restrictions
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
System manager
All
"Copy to" telephone(s) idle
Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Form 5d, Queued Call Console (QCC)
Data Form 1a, Modem Data Station
Data Form 1b, 75009 Data Station
Not applicable
Not applicable
No
Not applicable
Common Administrative Procedures
3-89