AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 243

Optional Group Calling Features
Console Display/Instructions
5 Enter the extension number of the calling group.
Group Calling:
Enter extension number
of group
Backspace
Exit Enter
6 Save your entry.
Select Enter.
7 Specify the hunt pattern.
Group Calling xxxx:
Select one
– Circular
–
Linear
Next
Exit Enter
8 Continue to assign a hunt pattern to another tailing group or go to Step 9.
Select Next
9 Save your entry.
Select Enter.
10 Return to the System Programming menu.
Select Exit three times.
Group Calling Delay Announcement
Use this procedure to designate the announcement device used to play
messages to callers while they are waiting in the queue.
Only one announcement device can be designated for each calling group;
however, more than one calling group can use the same announcement device.
The extension to which the delay announcement device is connected should not
be programmed as a calling group member.
If the extension jack or MFM was previously programmed as a regular
extension, you must remove all line/trunk button assignments before you
designate the extension jack as a delay announcement device.
Additional Information
Dial or type [ nnnn ].
xxxx = number entered in Step 5
Select Circular or
Linear.
Return to Step 7 to continue programming. The
next calling group will be displayed on Line 1.
Common Administrative Procedures
PC
←
[ F10 ]
[ F1 ]
[ F2 ]
[ F9 ]
[ F10 ]
[ F5 ] [ F5 ] [ F5 ]
3–121