AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 194

Telephones
Console Display/Instructions
4 Save your entry. Then, continue to copy button assignments or go to Step 5.
Select Enter or
Select Next
5 Return to the System Programming menu.
Select Exit two times.
Analog Multiline Telephone Without Built-in
Speakerphone (BIS) or Hands Free Answer
Intercom (HFAI) Capability
Use this procedure to identify analog multiline telephones with flat membrane
buttons that do not have built-in speakerphones (BIS) or Hands Free Answer
Intercom (HFAI) capability. The models that must be identified are 5-Button,
10-Button, 34-Button, and 34-Button Deluxe analog multiline models with flat
membrane buttons.
Keep the factory setting for analog multiline models with raised plastic buttons,
including the following models: 10-Button HFAI, 34-Button with speakerphone
(SP-34), 34-Button with speakerphone and display (SP-34D), BIS-10, BIS-22,
BIS-34, BIS-22D, and BIS-34D.
This procedure is not necessary for MLX or single-line telephones.
3–72
Common Administrative Procedures
Additional Information
After selecting Enter, you may continue
to copy button assignments from the
extension displayed on Line 1 to
additional extensions.
After selecting Next, you may copy button
assignments from the next sequential
extension.
Return to Step 3 to continue programming. The
extension to be copied from will be displayed on
Line 1.
PC
[ F10 ]
[ F9 ]
[ F5 ] [ F5 ]