AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 629

Automatic Route Selection
Summary: Voice and/or Data Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Procedure: Voice and/or Data Routing
Console Display/Instructions
1 Select the Tables menu.
System Programming:
Make a selection
System Extensions
SysRenumber Options
Operator Tables
LinesTrunks AuxEquip
Exit NightSrvce
2 Select Automatic Route Selection.
Tables:
Make a selection
AllowList ARS
A11owTo
Disallow
DisallowTo
Exit
3 Go to the second screen of the ARS menu.
ARS:
Make a selection
ARS l+7Dial SubA Absorb
ARS Input Sub A Digit
Sub B Start
Sub A Pools
Sub A FRL Sub B Stop
Exit Sub B Pool
System manager
Hybrid/PBX
Not required
Form 3g, Automatic Route Selection Default and Special
Numbers Tables
Voice
Voice Only, Data Only, Voice/Data
No
No
Tables → ARS → More → Sub A Data or Sub B Data → Dial
table no. and route no. → Enter → Select capability → Enter
→ Exit → Exit
[ F8 ] → [ F6 ] → [ PgUp ] → [ F7 ] or [ F8 ] → Type table no, and route
no. → [ F10 ] → Select capability → [ F10 ] → [ F5 ] → [ F5 ] → [ F5 ]
Additional Information
>
Press More.
Programming Procedures
PC
[ F8 ]
[ F6 ]
[ PgUp ]
4–279