AT&T MERLIN LEGEND Release 3.0 System Programming Manual page 376

Lines and Trunks
Procedure: Type of Trunk
Console Display/Instructions
1 Select the Lines and Trunks menu.
System Programming: >
Make a selection
Extensions
System
Options
SysRenumber
Operator Tables
LinesTrunks AuxEquip
NightSrvce
Exit
2 Select Loop-Start/Ground-Start/DSl.
Lines and Trunks:
Make a selection
PRI
LS/GS/DSl
TIE Lines copy
RemoteAccss
TT/LS Disc
DID Pools
Tool Type
Exit
3 Enter the slot number in the control unit that contains the module
( nn = 1 to 17).
Loop/Ground/DS1:
Enter slot number (1-17)
Backspace
Exit Enter
4 Save your entry.
Select Enter.
5 Specify the type of trunks connected to the module.
**** GS/LS Slot xx:
Select one
All Ground
GroundStart
–
Loop Start All Loop
–
Exit
4–26
Programming Procedures
Additional Information
>
Module is: 400,408, 408GS/LS-MLX,
800GS/LS, or 800 GS/LS-lD.
Dial or type [ nn ].
**** = 400, 408, 408-MLX, or 800 modules
xx = slot number entered in Step 3
–
– Select GroundStart or
Loop Start and go to Step 6.
Or, select All Ground or
All Loop and go to Step 9.
PC
[ F4 ]
[ F1 ]
←
[ F10 ]
[ F1 ]
[ F2 ]
[ F6 ]
[ F7 ]