Fixed Display Buttons - AT&T MERLIN LEGEND Release 3.0 System Programming Manual

System Programming Console

Fixed Display Buttons

The top two buttons in each column have the same labels and functions
regardless of the screen display. This type of button is called a fixed display
button. Table 1–1 describes the functions of the fixed display buttons.
l–l.
Table Fixed Display Buttons
Button Function
Home Return to normal call-handling mode after you finish programming
Display the main menu shown in Figure 1-2
Menu
Display more items when a menu is continued on more than one
More
screen, indicated by an angle bracket (>) on the upper right of the
screen.
(Inspect) View a list of lines or extensions on which a feature is
Inspct
programmed or the settings for a feature.
Unlabeled Display Buttons
Use the five unlabeled display buttons on each side of the screen to select
commands, options, or items on the screen. The functions of these buttons vary
based on the option you select.
If you are using SPM for system programming, the simulated MLX-20L console
screen on your PC screen shows the function keys that correspond to the
console screen selections. This book shows function keys in a box: [
example, to save an entry, you select Enter on the console or press [ F10 ] on your
PC. See Chapter 2, "Programming with SPM, " for details about using function
keys and additional information about SPM.
Console Overlay
The programmable line buttons are on the main part of the console. There are
actually 20 line buttons on the console, but you can use the console overlay to
program up to 34 line buttons on any extension through centralized telephone
programming. Select Page 1 to access line buttons 1 through 20 and Page 2 to
access line buttons 21 to 34. The top line of numbers next to each line button on
the console overlay represents line buttons. See Figure 1–3 below.
Appendix E shows the button diagrams for the telephones used in the
communications system. Refer to this appendix when programming buttons for
other telephones.
] . For
Programming Basics 1–7