Assign Trunks Or Pools To Telephones - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Assign Trunks or Pools to Telephones

Assign Trunks or Pools to
Telephones
Use this procedure to assign outside lines/trunks (connected to the control
unit) to specific buttons on each telephone. The lines/trunks assigned to a
button on a telephone are called personal lines.
This procedure is used only to change or add personal lines, Loudspeaker
Paging, or Pool buttons (Hybrid/PBX only) to telephones. See "Assign
Intercom or System Access Button" procedures to add or change Intercom
(ICOM) or System Access (SA) buttons.
Individual lines/trunks can be assigned to a maximum of 64 telephones.
Individual pools can be assigned as a Pool button on a maximum of 64
telephones.
The following lines/trunks cannot be assigned to a button on a telephone:
Lines/trunks used for Music On Hold
Lines/trunks used for maintenance alarms
NOTE:
If you use equipment that rebroadcasts music or other copyrighted materials,
you may be required to obtain a copyright license from and pay license fees
to a third party (such as the American Society of Composers, Artists, and
Producers or Broadcast Music Incorporated). Magic on Hold® requires no
such license and can be purchased from AT&T.
Pool buttons cannot be assigned or removed from extensions unless the pool
has trunks assigned. If all trunks are to be removed from a pool, all Pool
button assignments must first be removed from telephones. Another way of
handling this situation is to program another trunk into the pool and then
remove the Pool button assignments from the extensions.
10-2 Telephones