A-5-2 Error Descriptions - Omron M1 Series User Manual

A-5-2
Error Descriptions
This section describes errors.
Error Table
The items that are used to describe individual errors (events) are described in the following copy of an
error table.
Event name Gives the name of the error (event).
Description Gives a short description of the error (event).
Source Gives the source of the error
(event).
Error attrib- Level
utes
Effects User program
Indicators EtherCAT NET RUN
Gives the status of the built-in EtherNet/IP port and built-in EtherCAT port indicators. Indicator status is
given only for errors in the EtherCAT Master Function Module and the EtherNet/IP Function Module.
System-de- Variable
fined varia-
Lists the variable names, data types, and meanings for system-defined variables that provide direct error
bles
notification, that are directly affected by the error, or that contain settings that cause the error.
Cause and Assumed cause
correction
Lists the possible causes, corrections, and preventive measures for the error (event).
Attached in- Provides the additional information that is displayed by the Sysmac Studio or an NS-series PT.
formation
Precautions/ Provides precautions, restrictions, and supplemental information.
Remarks
*1. One of the following:
Minor fault: Minor fault level
Observation
Information
*2. One of the following:
Automatic recovery: Normal status is restored automatically when the cause of the error is removed.
Error reset: Normal status is restored when the error is reset after necessary measures are taken.
Cycle the power supply: Normal status is restored when the power supply is turned OFF and then back ON after nec-
essary measures are taken.
Replace the inverter: Normal status is restored when the inverter is replaced with a new one.
*3. "Continues." indicates that execution of the user program will continue.
M1 Series EtherCAT Type User's Manual (I670)
Source details Gives details
Tells the influ- Recovery
ence on con-
*1
trol.
Tells what will Operation
happen to exe-
cution of the
user pro-
*3
gram.*
EtherCAT NET ERR
Data type
Correction
Event code Gives the code of the error
(event).
Detection tim-
on the source ing
of the error.
Gives the re- Log category
covery meth-
*2
od.
Provides special information on the operation that
results from the error (event).
EtherCAT LINK/ACT
Name
Prevention
Appendices
A
Tells when the
error is detect-
ed.
Tells which log
the error is
saved in.
A-219