Omron M1 Series User Manual page 659

Sub- Pa-
Index
index rame-
(hex)
(hex) ter No.
28 F39 1st Stop Fre-
quency Holding
Time
29 F40 Torque Limit 1
2A F41 Torque Limit 2
2B F42 1st Drive Control
Selection
2C F43 1st Overload
Protect Function
Selection
2D F44 1st Overload
Protect Level
33 F50 Electronic Ther-
mal for Braking
Resistor Dis-
charging Capaci-
ty
34 F51 Electronic Ther-
mal for Braking
Resistor Allowa-
ble Average Loss
M1 Series EtherCAT Type User's Manual (I670)
Function name Monitor or data range
V/f DTV
SLV PGV PM SLV PM PGV
0.00 to 10.00
V/f DTV
SLV PGV PM SLV PM PGV
0 to 300
V/f DTV
SLV PGV PM SLV PM PGV
0: IM V/f control
1: IM Dynamic torque vector control
without speed sensor
3: IM V/f control with speed sensor
4: IM Dynamic torque vector control
with speed sensor
5: IM Vector control without speed
sensor
6: IM Vector control with speed sen-
sor
15: PM Vector control without speed
and pole position sensor
16: PM Vector control with speed
and pole position sensor
V/f DTV
SLV PGV PM SLV PM PGV
0: Disable
1: Enable at constant speed
2: Enable during ACC/constant
speed operation (Disable during
DEC)
V/f DTV
SLV PGV PM SLV PM PGV
20 to 200
V/f DTV
SLV PGV PM SLV PM PGV
1 to 9,000
32,767: Disable
V/f DTV
SLV PGV PM SLV PM PGV
0.001 to 99.99
Default
data
0.00
PG V/f PG DTV
300
PG V/f PG DTV
0
PG V/f PG DTV
2
PG V/f PG DTV
180
PG V/f PG DTV
32,767
PG V/f PG DTV
0.001
PG V/f PG DTV
Appendices
Set-
ting
PDO
dur- Unit
map
ing
RUN
√ s Possible
√ % Possible
--- --- Possible
√ --- Possible
√ % Possible
√ kWs Possible
√ kW Possible
A-113
A