Omron M1 Series User Manual page 368

8 Other Functions
Parameter No.
3003Hex-3FHex
3003Hex-4DHex
3003Hex-4EHex
3012Hex-2AHex
3003Hex-52Hex
3012Hex-2DHex
3003Hex-56Hex
8-14
Item
Fin Temperature Monitor
(Real-time value)
Service Life of Main Circuit
Capacitor Elapsed Time
Service Life of Main Circuit
Capacitor Remaining Time
2nd Cumulative Run Time
of motor
1st Remaining Time before
the Next Motor Mainte-
nance
2nd Number of Startups
1st Remaining Startup
Times before the Next Mo-
tor Maintenance
Range
The current temperature of the cooling
fin inside the inverter is displayed. Al-
though the display is in increments of
20.0 to 125.0 [°C]
0.1°C, the data changes in increments
of 1°C.
Display unit: °C
The time during which voltage is ap-
plied to the electrolytic capacitor of the
main circuit is displayed as the cumula-
tive elapsed time. The capacity of the
electrolytic capacitor of the main circuit
0 to 6553 [10h] is measured when the main power sup-
ply is OFF, and the elapsed time is cor-
rected.
Measurement range: 0 to 65530 hours
If 65530 hours is exceeded, the accu-
mulation operation stops.
The time remaining until the service life
0 to 6553 [10h] of the electrolytic capacitor of the main
circuit is displayed.
The cumulative time of the 2nd motor
0 to 9999 [x10h]
run time is displayed.
The time until the next maintenance is
displayed.
The value obtained by subtracting the
cumulative motor run time from 1st Mo-
0 to 9999 [x10h] tor Maintenance Interval
(3008Hex-4FHex) is displayed. (This
function is available only for the 1st mo-
tor)
Display: 0 to 99990
The number of operations of the 2nd
motor (number of times the RUN com-
0 to 65530
mand for the inverter is turned ON) is
accumulated.
The number of startups until the next
maintenance is displayed.
The value obtained by subtracting the
number of startups from 1st Preset
0 to 65530
Startup Count for Motor Maintenance
(3008Hex-50Hex) is displayed. (This
function is available only for the 1st mo-
tor)
M1 Series EtherCAT Type User's Manual (I670)
Display item