Omron M1 Series User Manual page 822

Appendices
Event name Locked by Password
Meaning An incorrect user password was entered more than the specified number of times.
Source EtherCAT Master Function Mod-
ule
Error attrib- Level
utes
Effects User program
Indicators EtherCAT NET RUN
---
System-de- Variable
fined varia-
None
bles
Cause and Assumed cause
correction
(1) User password 1 or 2 was en-
tered more than the specified
number of times.
Attached in- None
formation
Precautions/ None
Remarks
A-276
Source details Slave
Minor fault Recovery
Continues. Operation
EtherCAT NET ERR
---
Data type
None
Correction
Reset the alarm.
→ Turn OFF and then ON the
power supply to the inverter
again.
If you have forgotten your pass-
word
→ Set Data Initialization
(3008-04 hex) to 1 and initialize
the parameters.
Event code 38A50000 hex
Detection tim-
ing
Error reset Log category
Motor stops.
EtherCAT LINK/ACT
---
Name
None
Prevention
None
M1 Series EtherCAT Type User's Manual (I670)
Continuously
System log