Omron M1 Series User Manual page 195

 7SEG Monitor Item Selection (3052Hex-52Hex) = 0: Display drive status
One second elapses
Normal display
• Operation enabled status
The display is as follows when "Control Word" (6040Hex) is enabled.
• FW = ON status
The display is as follows when "Command" (5000Hex) is enabled and the direction of rotation is
forward.
• RV = ON status
The display is as follows when "Command" (5000Hex) is enabled and the direction of rotation is
reverse.
 Alarm, light alarm occurred
For details on the LED display after an error has occurred, refer to 9-1-1 Alarm Display on page
9-2.
 Measuring capacitor life
 Functional safety state Error detected
M1 Series EtherCAT Type User's Manual (I670)
5 Operation and Test Run
5
5-9