Omron M1 Series User Manual page 47

Item
Rated input voltage
Rated input cur-
*4
rent [A]
Rated output voltage
Rated output cur-
*5
rent [A]
*6
Braking torque
[%]
Braking Regenerative
resistor braking
circuit
Minimum con-
nection resist-
ance [Ω]
Short circuit current rating
[kA]
Weight [kg]
*1. The maximum applicable motor capacity is given for a standard four-phase motor. When selecting an inver-
ter, select not just by kW but also ensure that the inverter rated output current is greater than the motor rat-
ed current.
*2. In calculating the rated capacity, the rated output voltage is assumed to be 200 V or 240 V.
*3. A voltage higher than the power supply voltage cannot be output.
*4. When Carrier Frequency (3004Hex-1BHex) is set to the following or below, derating is required.
HHD mode...AB001 to A2037: 8 kHz
HND mode...AB001 to A2022: 4 kHz
For derating, refer to A-1 Derating Table on page A-2.
*5. The following shows the calculated value when the power supply capacity is 500 kVA (10x the inverter ca-
pacity when the inverter capacity exceeds 50 kVA) and when a %X = 5% power supply is connected.
*6. The numeric value is the average braking torque per individual motor. (Varies according to motor efficiency)
*7. Allowable ambient temperature of 40°C or below of AB004, AB007, AB015 and AB022.
The rated output current in the HND mode decreases by 2% for every temperature increase of 1°C when
the ambient temperature is 40°C or more.
*8. The maximum applicable motor capacity is 2.2 kW when the input voltage is 220 to 240 V.
*9. The maximum applicable motor capacity is 3.0 kW when the input voltage is 220 to 240 V.
Common Specifications
Item
*1
Enclosure rating
M1 Series EtherCAT Type User's Manual (I670)
*3
HHD 1.8 3.3
HND
3.3 4.9
HHD 1 1.6
HND
1.2 1.9
HHD 150
HND 75
Built-in braking resistor circuit (discharge resistor separately mounted)
100 to 120
Approx. Approx.
0.5 0.5
Open type (IP20)
Single-phase 200 V
Single-phase 200 to 240 V, 50/60 Hz
5.4 9.7
7.3 13.8
Single-phase 200 to 240 V (with AVR)
3 5
*7 *7
3.5 6.0
100
73 68
100
Approx. Approx. Approx.
0.7 0.9
Specifications
1 Overview
16.4 22 45.4
20.2 26 -
8 11 17.5
*7 *7
-
9.6 12
70 40 40
48 29 -
40 to 120
Approx. Approx.
1.5 1.7 3.8
1-13
1