Tributary Interface Circuit Pack Descriptions - Nortel Optical Multiservice Edge 6130 Planning Manual

4-10 Hardware description
•
•
Refer to
the sections in
functionality supported.

Tributary interface circuit pack descriptions

This section provides an overview of the tributary interface circuit packs. The
circuit packs can be equipped in the tributary slots 4, 5, 8, and 9 of the chassis
(see
OME6130 Release 1.0 supports the circuit packs listed in
Table 4-6
OME6130 service modules
Interface circuit pack
8x10/100BT L1 circuit pack
2xGE L1 circuit pack
28xE1/DS1 circuit pack
3xE3/DS3 circuit pack
2x155M circuit pack
Optical Multiservice Edge 6130
supports unprotected, 1+1 MSP, and SNCP traffic protection schemes
line timing synchronization support (provides the handover between the
line timing and the shelf)
Optical specifications on page 7-23
OAM&P description on page 6-1
Figure 4-2 on page
NT6Q92MA Rel 1.0 Iss 1 Standard September 2006
for specifications of the SFPs and
4-3).
for more details on
Table 4-6.
Page
4-11
4-13
4-15
4-16
4-17