Panasonic FP7 Series Command Reference Manual page 57

● Operands indicate the targets of operation and/or methods for operation processes. There
are three types of operands: [S], [D], and [n]. The number and types of operands that need to
be specified vary by instruction.
R0
■
Types of operands
Symb
Abbreviation
ol
S Source
D Destination
n Number
■
Every Scan Execution Type and Differential Execution Type
● For high-level instructions, there are two execution types: every scan execution type and
differential execution type.
(1) Every Scan Execution Type
This type of instruction is executed repeatedly for every scan while the internal relay is
established.
Internal relay
High-level instruction
(2) Differential Execution Type
This type of instruction is executed only for a single scan when a leading edge or trailing edge
of the internal relay is detected.
WUME-FP7CPUPGR-12
Mnemonic Operation unit
MV. SS
Function
Source Specify data targeted by operation and/or methods for processing.
Destination Specify the storage location for operation result.
Numerical data that specify data targeted by operation and/or
Number
methods for processing.
Single scan
2.1 Structure of Instructions
Operand
K0 DT0
S D
ON
OFF
Executed
2-5