Panasonic FP7 Series Command Reference Manual page 45

Operatio
n
Name
Unit
n Send
Instruction
General-
Purpose
Communicatio US, SS
n Send
Instruction
General-
Purpose
Communicatio US, SS
n Receive
Instruction
MEWTOCOL/
MODBUS
US, SS
Master Send
Instruction
MEWTOCOL/
MODBUS
Master
US, SS
Communicatio
n Receive
Instruction
MODBUS
Master Send
Instruction: US, SS
Function Code
Specification
MODBUS
Master
Receive
US, SS
Instruction:
Function Code
Specification
Change of
SCU −
Parameter
Obtainment of
SCU −
Parameters
Configuration
−
Change
WUME-FP7CPUPGR-12
Mnemonic Operand Function overview
GPSEND (P) S, n, D
GPRECV (P) D1, D2
S, n, D1,
SEND (P)
D2, D3
S1, S2, n
RECV (P)
D1, D2
S, n, D1
SEND (P)
D2, D3
S1, S2, n
RECV (P)
D1, D2
PMSET S, n, D
pPMSET S, n, D
PMGET (P) S, D
CONFIG (P) -
1.2 List of High-level Instructions
SCU unit (SCU: COM port, ET-LAN:
connection).
Transfers the [n] bytes of data stored in the
area starting with [S] to external devices via
the COM port (SCU) or the LAN port (ET-
LAN) of the unit.
Copies the data received from external
devices via the COM port (SCU) or the LAN
port (ET-LAN) of the unit to the range of
[D1] to [D2].
Reads the data from devices within the
master unit starting with [S], and stores the
data in the partner station number [D1]
from the address starting with [D2]. The
number of sent data is specified by [n].
Reads the data from the partner station
number [S1] from the address starting with
[S2], and stores the data in the area of the
master unit starting with [D1]. The number
of received data is specified by [n].
Reads the data from devices within the
master unit starting with [S], and stores the
data in the partner station number [D1]
from the address starting with [D2]. The
MODBUS function code and station No. are
specified by [D1], and the number of sent
data is specified by [n].
Reads the data from the partner station
number [S1] from the address starting with
[S2], and stores the data in the area of the
master unit starting with [D1]. The
MODBUS function code and station
number are specified by [S1], and the
number of received data is specified by [n].
The data stored in the area of [n] words
starting with [S] is set for the
communication parameter of the COM port
(SCU) of the unit.
For PMSET instruction, the
acknowledgment process is performed
when the instruction is executed. For
pPMSET instruction, the acknowledgment
process is performed when the scan is
finished.
Reads the communication parameter set
for the COM port (SCU) of the unit, and
stores it in the area starting with [D].
Changes the settings for MEWTOCOL
communication.
Page
"P.15-4"
(Note 1)
"P.15-15"
"P.15-21"
"P.15-29"
"P.15-37"
"P.15-44"
"P.15-51"
(Note 2)
"P.15-51"
"P.15-58"
"P.15-65"
1-27