Panasonic FP7 Series Command Reference Manual page 22

1.1 List of Basic Instructions
Mnemon
Name
Down counter
CT16
(16 bit)
Up/down
UDC
counter
Shift register SR
Left/right shift
LRSR
register
■
Control Instructions
Mnemon
Name
Master control
MC
relay
Master control
MCE
relay end
Jump JP
Label LBL
Loop LOOP
Label LBL
End ED
End Program
EDPB
Block
Conditional
CNDE
End
Eject EJECT
1-4
Symbol
ic
Symbol
ic
Function overview
[S] is specified as 32-bit data (U1 to
U4294967295).
For CT16, [S] is specified as 16-bit data (U1 to
U65535).
Increments or decrements from the preset
value [S] based on up/down input. To be used
with a comparison instruction described
immediately after.
Shifts the content of the word device specified
by [D] 1 bit to the left
Shifts the data range specified by [D1] to [D2]
to the left or to the right by 1 bit.
Function overview
When execution conditions are OFF, output
between MC and MCE is turned OFF.
Executes the program between MC and MCE
instructions when the execution condition is
ON.
Jumps to the LBL instruction with the same
number when the execution condition is ON
and executes the program.
Jumps to the LBL instruction with the same
number when the execution condition is ON
and executes the program. Set the number of
times to repeat the operation to [S].
Ends operation of the program. Indicates the
end of the main program.
Ends PB (program block).
Ends operation of the program when the
execution condition is ON.
Makes a page break when printing out.
Page
"P.3-63"
"P.3-66"
"P.3-69"
"P.3-73"
Page
"P.3-76"
"P.3-76"
"P.3-81"
"P.3-81"
"P.3-87"
"P.3-87"
"P.3-91"
"P.3-92"
"P.3-93"
"P.3-94"
WUME-FP7CPUPGR-12