Panasonic FP7 Series Command Reference Manual page 89

Example) When the value in DT0 is K10, the value in DT100 is written into DT210.
<Example 2> Modifying a transfer destination
The address in the data register (DT) for the transfer destination varies according to the value
of DT0.
Example) When the value of DT0 is U8, the value in DT108 is transferred to DT200.
■
Modifying an address
Address = basic address + value of I0 to IE
I0DT11
Standard address
11
11
11
WUME-FP7CPUPGR-12
I0 value Targeted address
+ K0 =
+ K10 =
+ K-10 =
2.6 Description of the memory area
DT11
DT21
DT1
2-37