Panasonic FP7 Series Command Reference Manual page 86

Hide thumbs Also See for FP7 Series:

Table of Contents

2.6 Description of the memory area

Using the set value area (TS, CS)

● During RUN mode, a set value for a timer or counter can be changed by rewriting the

corresponding set value area.

● The values in the set value area can be overwritten by user programs such as data transfer

instructions.

● Reading and writing of values can also be performed with the programming tool.

● Numbers of TS and TE correspond to timer numbers, and numbers of CS and CE

correspond to counter numbers.

Timer and counter No.

● Timer/counter settings for FP7 series can be specified using unsigned constants (U constants).

● The set value area (TS, CS) occupies a 32-bit area.

Set value area

Process value area

WUME-FP7CPUPGR-12