1.2 List of High-level Instructions
Operatio
Name
EtherNet/IP
−
input refresh
EtherNet/IP
−
output refresh
(Note 1)
Can be used with CPU units CPS4RE*/CPS3RE*.
■
Ethernet Communication (MC Protocol) Instruction
Operatio
Name
MC Protocol
Master
US, SS
Transfer
Instruction
MC Protocol
Master
Communicatio
US, SS
n Receive
Instruction
(Note 1)
Can be used with CPU units CPS4RE*/CPS3RE*.
■
SD Memory Card Access Instruction
Operatio
Name
Write file to
operation
US, SS
memory in BIN
format
Read from BIN
format file to
US, SS
operation
memory
File Data Write
−
Instruction
File data read
−
Directory
−
creation
1-32
n
Mnemonic
Unit
EIP_IN
(P)
EIP_OT
(P)
n
Mnemonic
Unit
SEND
(P)
RECV
(P)
n
Mnemonic
Unit
CDTWT
(P)
CDTRD
(P)
CWT
(P)
CRD
(P)
CMKDIR
(P)
Operand
Function overview
S1, S2,
Refreshes the input for the connections
D
targeted to be refreshed.
S1, S2,
Refreshes the output for the connections
D
targeted to be refreshed.
Operand
Function overview
Reads the data from the devices within the
master unit starting with [S], and stores the
data in the partner station from the address
S, n, D1
starting with [D1] + [D2]. The device type of
D2, D3
the transfer destination device is specified
by the high byte of [D1] and the number of
sent data is specified by [n].
Reads the data of the partner station from
the address starting with [S1] + [S2], and
stores it in the area of the master unit
S1, S2, n
starting with [D1]. The device type of the
D1, D2
transfer source device is specified by the
high bytes of [S1] and the number of
received data is specified by [n].
Operand
Function overview
Writes the binary data for [n] words from
S, n, D
the area starting with [S] to the SD memory
card as a file.
Reads [n] pieces of binary data from the file
with the file number specified by [S], and
S, n, D
stores it in the device address starting with
[D].
Stores [n] pieces of data stored in the
S, n, D1,
device address starting from [S] to the file
specified by [D1] according to the
D2
parameter specified by [D2].
Stores [n] pieces of data to the device
S1, S2, n
address starting from [D] according to the
file specified by [S1] and the parameter
D
specified by [S2].
S
Creates a folder in an SD memory card.
Page
"P.17-186"
(Note 1)
"P.17-191"
(Note 1)
Page
"P.17-195"
(Note 1)
"P.17-201"
(Note 1)
Page
"P.18-2"
"P.18-4"
"P.18-6"
"P.18-19"
"P.18-30"
WUME-FP7CPUPGR-12