Panasonic FP7 Series Command Reference Manual page 23

■
Step ladder instructions
Mnemon
Name
Start Step SSTP
Next Step NSTL
Clear Step CSTP
Step End STPE
Block Clear ZRST
■
Subroutine instructions
Mnemon
Name
Subroutine
SBL
Label
Subroutine
RET
Return
Local
Subroutine
CALL
Call
Output OFF
Type Local
Subroutine FCALL
Call
Subroutine
Call (with PB
ECALL
number
Specification)
Output OFF
Type
Subroutine
Call
EFCALL
(with PB
number
specification)
WUME-FP7CPUPGR-12
Symbol
ic
Symbol
ic
1.1 List of Basic Instructions
Function overview
Header for program "n" which is managed as a
process.
Starts the specified process "n" and clears
other running processes. (Every scan execution
type)
Clears running process "n".
End of step ladder area.
Clears running processes [D1] to [D2].
Function overview
When CALL/FCALL/ECALL/EFCALL instruction
is executed, it jumps to subroutines with the
same label number and executes the
subroutines. Use RET instruction to return to
the address of the main program and execute
the program.
When the trigger (execution condition) is ON:
subroutine is executed.
When the trigger (execution condition) is OFF:
subroutine is not executed.
Holds the output from within subroutines.
When the trigger (execution condition) is ON:
subroutine is executed.
When the trigger (execution condition) is OFF:
subroutine is not executed.
However, the output from within subroutines is
cleared.
For subroutines in the PBn program block:
When the trigger (execution condition) is ON:
jumps to subroutine.
When the trigger (execution condition) is OFF:
subroutine is not executed.
For subroutines in the PBn program block:
When the trigger (execution condition) is ON:
jumps to subroutine.
When the trigger (execution condition) is OFF:
subroutine is not executed.
However, the output from within subroutines is
cleared.
Page
"P.3-95"
"P.3-95"
"P.3-95"
"P.3-95"
"P.3-105"
Page
"P.3-109"
"P.3-109"
"P.3-111"
"P.3-111"
"P.3-113"
"P.3-115"
1-5