Specification Of Device Numbers - Panasonic FP7 Series Command Reference Manual

Hide thumbs Also See for FP7 Series:

Table of Contents

2.4 Specification of Device Numbers

For external input (X), external output (Y), internal relay (R), link relay (L), pulse

relay (P), system relay (SR), direct input (IN), direct output (OT)

Since relays may be handled in units of 16 points, their numbers should be expressed as a

combination of decimal and hexadecimal numbers.

<Example> External input X

X 0, X 1, ･･････････････････････････X F

X10, X11, ･･････････････････････････X1F

X20, X21, ･･････････････････････････X2F

Relay number of external input/output

● Only what is actually allocated to the input contact can be used for external input (X).

● Only what is actually allocated to the output contact can be output for external output (Y).

External outputs (Y) that are not allocated can be used as internal relays.

● Allocation of numbers is decided according to the combination of units.

Timer contact (T), counter contact (C), and error alarm relay (E)

● The numbers of timer/counter contacts correspond to the numbers of timers/counters, and

should be specified by decimal numbers.

● The numbers of error alarm relays should be specified by decimal numbers.

T 0,T 1 ･･････････････････････････T4095

C 0,C 1 ･･････････････････････････C1023

E0, E1 ･･････････････････････････ E4095

WUME-FP7CPUPGR-12

0,1,2...9,A,B...F