Agilent Technologies X Series Manual page 83

Item
# Name
3 USB Connector
4 USB Connectors
5 MONITOR
6 LAN
7 Line power input
8 Removable Disk Drive
10 Analog Out
12 TRIGGER 1 OUT
13 Sync
15 TRIGGER 1 IN
16 Noise Source Drive +28 V
(Pulsed)
17 SNS Series Noise Source
18 10 MHz OUT
Chapter 2
USB 2.0 port, Type B. USB TMC (test and measurement class) connects to
an external pc controller to control the instrument and for data transfers
over a 480 Mbps link.
Standard USB 2.0 ports, Type A. Connect to external peripherals such as a
mouse, keyboard, printer, DVD drive, or hard drive.
Allows connection of an external VGA monitor.
A TCP/IP Interface that is used for remote analyzer operation.
The AC power connection. See the product specifications for more details.
Option PC3. Only available on instruments with
S/N MY/US/SG49370546 or higher.
For Option EMC:
Demod Audio
A trigger output used to synchronize other test equipment with the
analyzer. Configurable from the Input/Output keys.
Reserved for future use.
Allows external triggering of measurements.
For use with Agilent 346A, 346B, and 346C Noise Sources.
For use with Agilent N4000A, N4001A, N4002A Smart Noise Sources
(SNS).
An output of the analyzer internal 10 MHz frequency reference signal. It is
used to lock the frequency reference of other test equipment to the
analyzer.
About the Instrument
Rear-Panel Features
Description
83