Agilent Technologies X Series Manual page 382

AMPTD Y Scale
Key Path
Scope
Remote Command
Dependencies
Preset
State Saved
Initial S/W Revision
Key Path
Scope
Remote Command
Dependencies
Preset
State Saved
Initial S/W Revision
Off
Turns the internal preamp off
Key Path
Example
Readback
Initial S/W Revision
Low Band
Sets the internal preamp to use only the low band.
The frequency range of the installed (optional) low-band preamp is displayed in square brackets on the
key label.
Low Band
382
AMPTD Y Scale
Meas Global
[:SENSe]:POWer[:RF]:GAIN[:STATe] OFF|ON|0|1
[:SENSe]:POWer[:RF]:GAIN[:STATe]?
Preamp is not available on all hardware platforms. If the preamp is not present
or is unlicensed, the key is not shown.
The preamp is not available when the electronic/soft attenuator is enabled.
OFF
Saved in instrument state
Prior to A.02.00
AMPTD Y Scale, Internal Preamp
Meas Global
[:SENSe]:POWer[:RF]:GAIN:BAND LOW|FULL
[:SENSe]:POWer[:RF]:GAIN:BAND?
Preamp is not available on all hardware platforms. If the preamp is not present
or is unlicensed, the key is not shown.
If a POW:GAIN:BAND FULL command is sent when a low band preamp is
available, the preamp band parameter is to LOW instead of FULL, and an
"Option not installed" message is generated.
LOW
Saved in instrument state
Prior to A.02.00
AMPTD Y Scale, Internal Preamp
:POW:GAIN OFF
Off
Prior to A.02.00