Agilent Technologies X Series Manual page 607

Example
Notes
Preset
State Saved
Range
Readback Text
Initial S/W Revision
Trig Slope
Controls the trigger polarity. It is set positive to trigger on a rising edge and negative to trigger on a
falling edge.
Key Path
Remote Command
Example
Preset
State Saved
Initial S/W Revision
Trig Delay
Controls a time delay during which the analyzer will wait to begin a sweep after meeting the trigger
criteria. You can use negative delay to pre-trigger the instrument in time domain or FFT.
Key Path
Remote Command
Example
Preset
State Saved
Range
TRIG:AIQM:LEV –30 dBm
The I/Q reference impedance is used for converting between power and
voltage.
–25 dBm
Saved in instrument state
–200 dBm to 100 dBm
<level> dBm
Prior to A.02.00
Trigger, Baseband I/Q, Aux Channel I/Q Mag
:TRIGger[:SEQuence]:AIQMag:SLOPe POSitive | NEGative
:TRIGger[:SEQuence]:AIQMag:SLOPe?
TRIG:AIQM:SLOP POS
POSitive
Saved in instrument state
Prior to A.02.00
Trigger, Baseband I/Q, Aux Channel I/Q Mag
:TRIGger[:SEQuence]:AIQMag:DELay <time>
:TRIGger[:SEQuence]:AIQMag:DELay?
:TRIGger[:SEQuence]:AIQMag:DELay:STATe OFF|ON|0|1
:TRIGger[:SEQuence]:AIQMag:DELay:STATe?
TRIG:AIQM:DEL 10 ms
TRIG:AIQM:DEL:STAT ON
1 us
OFF
Saved in instrument state
–2.5 s to +10 s
Trigger
607