System Functions
System
The restore operation will check the validity of the restore file using the database's built-in file
validation. If the restore file is corrupt, the existing alignment data will remain in use.
If the serial number information in the backup file being restored is different from that of the instrument,
the following message appears (the serial number shown are examples):
For the N9030A, the default restore location will be the internal F: drive which is a solid-state memory
device located internally on the instrument. The default restore file will be the most recent file that
matches the default backup file name format: AlignDataBackup_N9030A_<serial number>_<date>.bak
Changing the drive letter will also modify the path displayed in the box below. When this step is first
loaded, the drive drop-down is populated with connected drives which provide the user with read access.
The path defaults to the AlignBackups folder. The most recent *.bak file in the folder will also be
selected by default.
181