Agilent Technologies X Series Manual page 605

State Saved
Range
Initial S/W Revision
Input Q
Pressing this key, when it is not selected, selects the Q channel's ADC voltage as the trigger. The Input Q
trigger condition is met when the voltage crosses the trigger level.
Key Path
Example
Readback Text
Initial S/W Revision
Trigger Level
Sets a level for the Input Q trigger. When the signal crosses this level, with the chosen slope, the trigger
occurs.
Key Path
Remote Command
Example
Preset
State Saved
Range
Readback Text
Initial S/W Revision
Trig Slope
Controls the trigger polarity. It is set positive to trigger on a rising edge and negative to trigger on a
falling edge.
Key Path
Remote Command
Example
Preset
Saved in instrument state
–2.5 s to +10 s
Prior to A.02.00
Trigger, Baseband I/Q
TRIG:<meas>:SOUR QINP
Input Q
Prior to A.02.00
Trigger, Baseband I/Q, Input Q
:TRIGger[:SEQuence]:QINPut:LEVel <voltage>
:TRIGger[:SEQuence]:QINPut:LEVel?
TRIG:QINP:LEV 0.5 V
0.25 V
Saved in instrument state
–1 to 1 V
0.1 of displayed unit (V, mV, etc.)
Prior to A.02.00
Trigger, Baseband I/Q, Input Q
:TRIGger[:SEQuence]:QINPut:SLOPe POSitive | NEGative
:TRIGger[:SEQuence]:QINPut:SLOPe?
TRIG:QINP:SLOP POS
POSitive
Trigger
605