Agilent Technologies X Series Manual page 132

System Functions
Save
This key will not actually cause the save, since the save feature still needs to know which trace to save
and where to save it. Pressing this key accesses the Save Trace menu that provides the user with these
options.
For rapid saving, the Trace menu lists registers to save to, or you can select a file to save to. Once you
pick the destination of the save in the Trace menu, the save will occur.
Key Path
Mode
Example
Notes
Initial S/W Revision
Register 1 thru Register 5
Selecting any one of these register menu keys causes the Trace(s) specified under From Trace, along
with the state of the currently active mode, to be saved to the specified Trace Register. The registers are
provided for rapid saving and recalling, since you do not need to specify a filename or navigate to a file.
Each of the register menu keys annotates whether it is empty or at what date and time it was last
modified.
These 5 trace registers are all that is available for all modes in the instrument. At present, only the Swept
SA measurement of the Spectrum Analyzer mode supports saving to Trace+State files. Registers are files
that are visible to the user in the My Documents\System folder.
Key Path
Mode
Readback
Initial S/W Revision
Key Path
Mode
Readback
Initial S/W Revision
Key Path
132
Save
SA
MMEM:STOR:STATe TRACE2,"MyTraceFile.trace"
This stores trace 2 data in the file MyTraceFile.trace in the default directory.
:MMEM:STOR:TRAC:REG TRACE1,2 stores trace 1 data in trace register 2
:MMEM:STOR:TRAC:REG ALL,3 saves the data for all 6 traces in trace
register 3
See "Save" on page 134.
Prior to A.02.00
Save, Trace
SA
Date and time with seconds resolution are displayed on the key, or "(empty)"
if no prior save operation performed to this register.
Prior to A.02.00
Save, Trace
SA
Date and time with seconds resolution are displayed on the key, or "(empty)"
if no prior save operation performed to this register.
Prior to A.02.00
Save, Trace