Agilent Technologies X Series Manual page 549

Example
Dependencies
Couplings
Preset
State Saved
Range
Backwards Compatibility SCPI
Initial S/W Revision
Gate View On/Off
Turning on Gate View in the Swept SA measurement provides a single-window gate view display.
Turning on Gate View in other measurements shows the split-screen Gate View. In these measurements,
when the Gate View is on, the regular view of the current measurement traces and results are reduced
vertically to about 70% of the regular height. The Zero Span window, showing the positions of the Gate,
is shown between the Measurement Bar and the reduced measurement window. By reducing the height
of the measurement window, some of the annotation on the Data Display may not fit and is not shown.
SWE:EGAT ON
SWE:EGAT?
The function is unavailable (grayed out) and Off when:
• Gate Method is LO or Video and FFT Sweep Type is manually selected.
• Gate Method is FFT and Swept Sweep Type is manually selected.
• Marker Count is ON.
The following are unavailable whenever Gate is on:
• FFT under Sweep Type when Method=LO or Video or Swept under
Sweep Type when Method=FFT
• Marker Count
While Gate is on, the Auto Rules for Sweep Type are modified so that the
choice agrees with the Gate Method: i.e., FFT for Method = FFT and Swept
for Method = LO or Video.
The Gate softkey and all SCPI under the [:SENSe]:SWEep:EGATe SCPI node
are grayed out when Source Mode is Tracking with an external source. This
is because the Gate circuitry is used to sync the external source. If the
Tracking Source is turned on, the Gate is turned off.
When Meas Method is RBW or FAST, this function is unavailable and the key
is grayed out.
Whenever Gate is on, Meas Method, RBW or FAST is unavailable and keys
for those are grayed out.
When Gate is on, Offset Res BW and Offset Video BW are ignored (if you set
these values) and the measurement works as if all Offset Res BW and all
Offset Video BW are coupled with the Res BW and the Video BW under the
BW menu. When Gate is on, the Offset BW key in the Offset/Limit menu is
grayed out.
Off
Saved in instrument state
On|Off
[:SENSe]:SWEep:TIME:GATE[:STATe]
Prior to A.02.00
Sweep/Control
549