Initial S/W Revision
Modified at S/W Revision
IF Gain
Sets the IF Gain function to Auto, Low Gain or High Gain. These settings affect sensitivity and IF
overloads.
This only applies to the RF input. It does not apply to baseband I/Q input.
Key Path
Initial S/W Revision
IF Gain Auto
Activates the auto rules for IF Gain
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision
Modified at S/W Revision
IF Gain State
Selects the range of IF gain.
Key Path
Mode
Prior to A.02.00
A.03.00
Meas Setup, Advanced
Prior to A.02.00
Meas Setup, Advanced, IF Gain
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
[:SENSe]:WAVeform:IF:GAIN:AUTO[:STATe] ON|OFF|1|0
[:SENSe]:WAVeform:IF:GAIN:AUTO[:STATe]?
WAV:IF:GAIN:AUTO ON
WAV:IF:GAIN:AUTO?
This only applies to the RF input. It does not apply to baseband I/Q input.
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
ON
Saved in instrument state.
On|Off
Prior to A.02.00
A.03.00
Meas Setup, Advanced, IF Gain
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
Waveform Measurement
Meas Setup
327